Posts may contain affiliate links (see Disclosure). Thank you so much for supporting Artsy-Fartsy Mama!
Saturday, April 18, 2020

Resin 101: Getting Started with Resin

Interested in crafting with resin? Here's everything you need to know to get started!

Resin 101: Getting Started with Resin

I started working with resin a little over a year ago, and it has become one of my favorite hobbies! For the longest time I was too intimidated to try it - and chances are that you are, too. Everyone has to start somewhere, and I'm here to help. I want to share a "Resin 101" series to show you just how much fun working with resin can be, and give you all of my tips and tricks!

Resin 101: Getting Started with Resin

Before buying resin, you need to decide what kinds of projects you want to make. Artwork? Jewelry? Working with molds? Surprisingly, not all resins are the same! Choosing the right resin for your project is important to get the results you want.

Resin 101: Getting Started with Resin

Resin comes in two parts: resin and hardener. These two parts MUST be equally combined and mixed precisely for it to cure correctly. Always read the directions before starting your project! Every resin is a little different, and each one comes with instructions to successfully work with resin.

Envirotex Lite is a thicker resin mixture. It's perfect for finishing your project with a smooth surface or a "doming" effect with a high gloss finish. This resin is just what you need for covering artwork, serving trays, or covering to top of tile coasters.

EasyCast is a thinner mixture and is meant to be used for projects 6 oz. or less. It's the best kind of resin to use when working with molds to create jewelry pieces, pendants, charms, coasters, paperweights, knobs, and more.

FastCast is just that - fast! This is urethane casting resin cures in about 10 minutes, and turns white (instead of clear) once it cures. Fast Cast can be drilled, sanded, shaped and painted. It can also be colored opaque pigments and transparent dyes. I like to use this resin in molds to create all kinds of projects!

Resin 101: Getting Started with Resin

Now that you have an idea of which kind of resin to use, here are the other resin supplies that I consider essential.

Mixing Cups: Resin mixing cups have measurement lines, which allows you to get those precise measurements on your resin and hardener. Imprecise measuring and/or mixing can prevent the epoxy resin from curing correctly, which means a ruined project!

Stir Sticks: After measuring and combining the resin and hardener, you need to make sure you mix it thoroughly using a clean stir stick.

Gloves: When you are working with resin, you are working with chemicals. Make sure you protect your skin by wearing gloves. Safety glasses are also a good thing to have around! I also recommend protecting your workspace with a silicone mat to make clean-up a breeze.

Resin Molds: There are SO many choices out there, and in almost any shape imaginable! I recommend using molds made of silicone or propylene. I find the majority of my molds on Amazon, Etsy, and even make my own silicone molds!

Mold Release: Molds are an investment, and a mold release and conditioner will prolong the life of your molds. It will also help the resin to be to easily removed once it has cured.

Heat Gun or Lighter: Getting bubbles in your resin is a common occurrence. The trick to removing them is with a little bit of heat!

Resin Colorants: You can easily add color to your resin mixture using transparent dyes, opaque pigments, alcohol inksmica powders and fine glitter.

Ready to get started?

Resin Projects for Beginners

Here is a fantastic list of resin projects that perfect for beginners! If you’re wanting to try crafting with resin but have felt intimidated, these beginner resin projects are a great place to get started.

As always, I would absolutely LOVE to see your creations! Also, if you have any questions or have any resin project requests, please let me know! I want to this Resin 101 series to help you be a successful resin crafter!

Don't forget to Pin, Like, and Share!
Resin 101: Getting Started with Resin

Would you like to comment?

  1. I am pinning! I have resin and molds. It looks like I need to get some mold release..... Thanks!

    Michelle
    https://mybijoulifeonline.com

    ReplyDelete
  2. This is on my "want to try list" so I am pinning this for later--a wealth of info! Thank you for putting it all in 1 spot!
    Pamela ~ DIY Vibes

    ReplyDelete
  3. What kind of resin would you recommend for making notebook covers?

    ReplyDelete
  4. I recently bought "Pixiss" diamond resin, does it harden by itself or do i have to purchase hardener as well?

    ReplyDelete
    Replies
    1. All epoxy resin needs hardener

      Delete
    2. If you have UV Resin, that doesn't need a Harnener, just a UV light. Epoxy Resin has an A and B part. You will mix the 2 together.

      Delete
  5. Thank you for information about resin art ❤️

    ReplyDelete
  6. This is my first try with resin I'm hooked on the video and links and really want to try this wish me luck .

    ReplyDelete
  7. Do you just use at oil at the end to make it clear?

    ReplyDelete
    Replies
    1. The resin actually cures clear (unless you use FastCast, which cures white), so you don't have to add anything at the end at all!

      Delete
  8. What type of resin would you recommend for adhering sea glass to window glass?

    ReplyDelete
  9. My son got a plastic “Big Brother” hospital bracelet, and I wanted to turn it into a keepsake for him. Would it be possible to use resin to attach it to a Christmas ornament?

    ReplyDelete
  10. Thank you so much, casting mold's can get quite expensive let alone the time it takes to finally receive. I am going to try to make my own. Wish me luck, I'll keep you updated. 😊

    ReplyDelete
  11. I wish it was easier to know how much resin to mix to put in the molds. I use my Character candy molds, they work great.

    ReplyDelete
    Replies
    1. Hi Janet! Here's a handy trick I use: fill your mold with rice or water. Pour it out into a measuring cup, and that is how much resin you will need. Hope that helps!

      Delete
  12. can the fastcast be used for tumblers?

    ReplyDelete
  13. Can this method be used to make coasters without mould. On a tile or board. Thanks

    ReplyDelete

Thank you so much stopping by! If you have any questions, please leave them here and I'll try to answer ASAP!