Free "Slay at Home Mom" SVG Cut File

All moms, whether working in the home or not, deserve a Slay at Home Mom shirt (with Free Cut File)!

Let's be honest - staying at home with kids is tough! Some of us have been doing it day-in and day-out for years, while others are new to it thanks to closing of schools and/or work. Either way, I am sure we all feel like we're failing at it from time to time, when in reality, we (and our kids) are doing just fine. This cut file is made for all of the moms out there - yes, you, the SLAY at home moms. Remember that we're in this together, and you are doing a great job at home (even when you don't think you are).

To make your own Slay at Home Mom shirt, you'll need these supplies:

• Blank T-Shirt
• Slay at Home Mom cut file (personal use only - commercial use available)
• Cricut Maker or Cricut Explore Air 2 machine
• HTV/Iron-On Vinyl OR
• Glitter HTV/Iron-On Vinyl
• EasyPress 2
• EasyPress Mat
• Iron-On Protective Sheet
• Weeding Tools

Upload the "Slay at Home Mom" cut file into Design Space and size the image to fit your shirt. Make sure to mirror your image before cutting the iron-on vinyl! Otherwise, your design will be backwards when you put it on the shirt. To do this, select the mat thumbnail in Design Space before cutting, and click the "Mirror" toggle to reverse the image.

*Here's a great tutorial on how to upload your own images into Cricut Design Space.

Place the vinyl face-down on the mat and load it into the machine. Change the material settings to the type of vinyl you are cutting, and then click the "Go" button to cut the vinyl.

"Weed" the excess vinyl by removing all of the parts that don't belong in the design. I usually peel away the outer edges starting at the corner and working my way around the design. Then I use weeding tools to remove the smaller pieces of the design.

Plug in the EasyPress 2 and power it on. Each kind of HTV has a different heat and time setting, so be sure to check the recommended EasyPress settings before getting started. Adjust the heat and time setting to your shirt and vinyl specifications. Once the light turns green and the machine beeps, it's ready to use.

When the EasyPress is up to temperature, place your shirt on the EasyPress Mat and preheat the area for 5-10 seconds. Lay the HTV down on the shirt, with the clear carrier sheet facing up. Set the EasyPress over the vinyl and press the green "C" button. Hold firmly in place while the timer counts down. Turn the shirt over and press the EasyPress firmly again for 15 seconds. Peel off the carrier sheet while the vinyl is still warm.

The cut file comes with multiple file types, so you can actually cut the design with any vinyl cutting machine. All I ask is that you use the file for personal use only. I hope you enjoy using this cut file, and I would absolutely LOVE to see your creations!!

Don't forget to Pin, Like, and Share!