Posts may contain affiliate links (see Disclosure). Thank you so much for supporting Artsy-Fartsy Mama!
Friday, March 10, 2023

Marbled Polymer Clay Earrings

Create a stunning set of earrings with swirls of blue polymer clay and specks of gold foil!


Gold Leaf Marble Clay Earrings

There are so many things you can make using polymer clay, and jewelry is one of my favorites. The marbling technique to make these Marbled Polymer Clay Earrings is one I've been wanting to try for a long time, and I finally did it! It's so much easier than I thought it would be, and crafters of any skill level can create a pair of custom earrings in no time. I love how chic the earrings turned out, and think they would make a great gift or product to sell in your small business.



Gold Leaf Marble Clay Earrings

To make your own set of Marbled Polymer Clay Earrings, you will need these supplies:


Gold Leaf Marble Clay Earrings

Cut off the top section of light blue polymer clay (this is Sculpey Soufflé in Glacier) and knead it well until it is a smooth, pliable texture. Shape it back into a rectangle brick.

Tip: If you work directly on a ceramic tile or baking mat, you don't have to worry about transferring your project when it's time to bake the clay. This significantly reduces the chances of you dropping or ruining your project in the process. 

Gold Leaf Marble Clay Earrings

Use the slicer tool to carefully cut the clay into small pieces. Be careful - that blade is very sharp!! The pieces don't have to be perfectly even in size. For odd-shaped pieces, roll them into little balls with your fingers. 

Gold Leaf Marble Clay Earrings

Cut another section of a darker blue polymer clay (this is Sculpey III in Blue). Knead it and and slice into small pieces with the slicer tool, just like with the lighter blue clay.

Gold Leaf Marble Clay Earrings

Pour all of the clay pieces together on your workspace, but don't press them together. At this point, you have two options: keep the clay on the tile or baking mat, or put the clay pieces into a sandwich-sized zipper storage bag. Pour some white acrylic paint over the clay.

Gold Leaf Marble Clay Earrings

If using your workspace, I'd recommend putting on disposable gloves. Get your hands in there and get all of the clay coated in paint. Add more, if necessary. If the clay is in a bag, gently move the clay pieces around until completely coated.

Gold Leaf Marble Clay Earrings

While the paint is still wet, sprinkle a generous amount of gold foil flakes over the clay. Mix the pieces around again (by hand, or in the bag) to disperse the flakes through the clay.

Don't worry about the mess. Acrylic paint is easy to clean up with water!

Gold Leaf Marble Clay Earrings

Grab all of the clay pieces in one hand, and form them into a log, or "cane". Make sure to push the pieces together tightly so that it all becomes one solid piece.

If you are having trouble getting the clay pieces to stick together, add some clear Liquid Sculpey to the mixture. 

Gold Leaf Marble Clay Earrings

Slice the entire cane into pieces, trying to keep them as even as possible. Arrange the slices on your tile or baking mat so that they are as close together as you can - you can even overlap the edges a little.

Tip: If you want the back of your earrings to be a solid color instead of marbled, you can roll out and place a thin piece of clay first and place the slices on top of that.

Gold Leaf Marble Clay Earrings

Lay two craft sticks down, parallel on either side of the clay slices. Use the roller to flatten the clay. Having the sticks placed on the sides of the clay will help to flatten the "slab" to an even thickness.

Gold Leaf Marble Clay Earrings

To cut out the earring shapes, I recommend using cutters. You could also freehand with a craft knife. Place the cutter over the clay and gently press it straight down. Pull the cutter straight up. If the clay stays down, leave it there. If it comes up with the cutter, be careful how you remove it. Poking through the top to push the clay out will leave dents or holes in your work. If necessary, you can re-roll the clay and start over. 

Here's a few tricks & tips for cutting clay that have worked for me:

  • Place a piece of plastic wrap over the clay first, and then cut the clay.
  • Your clay or workspace might be too warm. Put the clay in the fridge or freezer to cool it down before cutting. 
  • This one is a bit strange, but you can put your mouth over the cutter and blow to set the clay free.

Gold Leaf Marble Clay Earrings

Carefully peel away the excess clay and leave the earring pieces in place. It's ok if the edges of the earrings look a little rough. Just make sure to remove all of the excess. 

Gold Leaf Marble Clay Earrings

Preheat your oven and bake the earring pieces. Most polymer clays are usually baked at 275º for 15 minutes per quarter inch thickness, but refer to your specific clay packaging directions to make sure. Once baked, let the pieces cool completely before handling.

Because the clay was rolled onto the baking surface and wasn't moved before baking, they can be tough to move afterward. Use a slicer tool or craft knife and carefully slide it under an edge of the clay. After sliding it underneath, they should easily pop free without an issue.

Gold Leaf Marble Clay Earrings

Use a fine sandpaper to clean up the edges of the earring pieces. To make holes in the earrings to connect them, I used a hand drill tool. Another option would be to put the holes in the pieces before baking. Be careful not to drill too close to the edges, and if your earring breaks apart (I had one that did), you can put it back together with strong adhesive.

Gold Leaf Marble Clay Earrings

To give the earrings a shiny and professional finish, apply a coat of gloss glaze or UV Resin to the surface with a toothpick.

If using glaze, apply it to the clay in thin coats (30 minutes between each coat). Give the earrings 24 hours to dry completely.

If using UV resin, apply a thin coat over the earrings, and cure under a UV light according to package directions.

Gold Leaf Marble Clay Earrings

Use pliers to open a 10-12mm jump rings and hook it through the holes in the earring sets. Close the jump rings with the pliers.

Turn the earrings over, and attach an earring post to the center of each round clay piece using strong adhesive or UV Resin.

Gold Leaf Marble Clay Earrings

Making jewelry out of polymer clay is a lot of fun, and so easy! There are so many ways to customize these earrings to fit your style with shapes, colors, and sizes. If you ever make some Marbled Polymer Clay Earrings or any other clay crafts, I would love to see them! Leave me a comment, or tag a photo on FacebookTwitter, or Instagram! #AFMcrafts

Don't forget to Pin, Like, and Share!
Gold Leaf Marble Clay Earrings

Would you like to comment?

  1. Hi Lindsay! Your earrings turned out amazing! Also, I wanted to drop a quick message to let you know that I featured your tutorial on Crafts on Display, a growing community of crafting enthusiasts. You can check it out here – https://craftsondisplay.com/jewelry/marbled-polymer-clay-earrings-31679/

    ReplyDelete
  2. Awesome! I’ve been looking for a good tutorial on using polymer clay. I don’t know if I’ll ever get around to it, but now I have a starting point.

    Michelle
    https://mybijoulifeonline.com

    ReplyDelete
  3. Love this technique. Going to post my bowl using this tutorial and giving Artsy Fartsy the credit.

    ReplyDelete

Thank you so much stopping by! If you have any questions, please leave them here and I'll try to answer ASAP!