Posts may contain affiliate links (see Disclosure). Thank you so much for supporting Artsy-Fartsy Mama!
Friday, June 10, 2022

Free "Poolside and Chill" SVG Cut File

Make a splash this summer with a "Poolside and Chill" shirt using this FREE SVG Cut File!

Free "Poolside and Chill" SVG Cut File

Summer is here, and I've got a splash-tastic cut file to share with you! This adorable "Poolside and Chill" SVG design can be worn all summer long. There are so many things you can create with it using your Cricut (or vinyl cutting machine) like summer t-shirts, swim shirts, totes, home decor, and so much more! I can't wait to see what you create!


To make your own Poolside and Chill shirt, you'll need these supplies:


Poolside and Chill SVG in Cricut Design Space

Upload the "Poolside and Chill" cut file into Design Space and size the image to fit your shirt and change any colors as necessary. Make sure to mirror your image before cutting the iron-on vinyl, otherwise your design will be backwards when you put it on the shirt. To do this, select the mat thumbnail in Design Space before cutting, and click the "Mirror" toggle to reverse the image.

*Here's a great tutorial on how to upload your own images into Cricut Design Space.

Cricut Explore Air 2 Machine

Place the vinyl(s) face-down on the mat and load it into the machine. Change the material settings to the type of vinyl you are cutting, and then click the "Go" button to cut the vinyl.

"Weed" the excess vinyl by removing all of the parts that don't belong in the design. I usually peel away the outer edges starting at the corner and working my way around the design. Then I use weeding tools to remove the smaller pieces of the design.

Dad Joke Shirt with Free Cut File

Plug in the EasyPress 2 and power it on. Each kind of HTV has a different heat and time setting, so be sure to check the recommended EasyPress settings before getting started. Adjust the heat and time setting to your shirt and vinyl specifications. Once the light turns green and the machine beeps, it's ready to use.

When the EasyPress is up to temperature, place your shirt on the EasyPress Mat and preheat the area for 5-10 seconds. Lay the HTV down on the shirt, with the clear carrier sheet facing up. Set the EasyPress over the vinyl and press the green "C" button. Hold firmly in place while the timer counts down. Turn the shirt over and press the EasyPress firmly again for 15 seconds. Peel off the carrier sheet while the vinyl is still warm.

Free "Poolside and Chill" SVG Cut File

The cut file comes with multiple file types, so you can actually cut the design with any vinyl cutting machine. All I ask is that you use the file for personal use only. I hope you enjoy using this cut file, and I would absolutely LOVE to see your creations!! #AFMcrafts

Don't forget to Pin, Like, and Share!
Free "Poolside and Chill" SVG Cut File

Would you like to comment?

  1. So cute! Wishing I was poolside and chilling right now.

    Alexandra
    EyeLoveKnots.com
    OnRockwoodLane.com

    ReplyDelete

Thank you so much stopping by! If you have any questions, please leave them here and I'll try to answer ASAP!